|   
Product Types
 
 
 
 
 
 
 
 
Industries
 
 
 
 
 
Services
 
 
 
 
 
   

Products that we carry by
DRB Industries LLC

    Product
16" Cylindrical Cartridge Filter

DRB Industries LLC offers the 16” Diameter Cylindrical Pulse Cartridge Filter for AAF® Systems. Our filter comes in a variety of media choices to fit your operating conditions (80/20 blended and 100% synthetic) with pleat separators and hot spiral glue bead to add extra stability to the media surface. Corrosion resistant Galvanized Metal Liners and End Caps are standard (SS is also available). A seamless gasket for an air tight seal is also standard. Also, our filter includes a 1/2” Pre-Filter Wrap.

Acoustic Enclosures

Our partner companies design, build, and / or repair complete Enclosure Systems to include Acoustic and Gas Turbine Enclosures for all major OEMs. We specialize in meeting noise criteria with the most stringent requirements on most octive bands. Whether you are looking for a new Enclosure or a Retrofit Improvement of an existing structure, we can provide you with the most cost-effective solution for your sound and protection requirements.

Coalescer Pre-Filter

Our Coalescer Pre-Filter comes with a high weft, moisture resistant fiberglass media. It agglomerates the water particles in the atmosphere, transforms them into drops, drains them through the lower panel fiber, and evacuates them out of the air stream. It is 100% efficient @ 3 microns and above, and is nested in our reusable plastic frame.

Conical Pulse Filter Cartridge

Our High Efficiency Conical Pulse Filter Cartridges come in 2 different sizes and have low pressure drop characteristics, high volumetric air flow, and high dust holding capacities for even the most demanding application.

Cooling Tower Fans and Related Parts

We carry fan decks constructed with FRP, plywood, and tongue and groove. Fans and fan parts are made from the following manufacturers: SPX, Marley, Fluor, Psychrometric Systems Inc, Hamon, Midwest Towers, GEA, Ilmed Impianti, Liang Chi, King Sun, Truwater, and SPIG.

Cooling Tower Gear Boxes

Gearboxes are made by Amarillo and Sumitomo, hundreds of models are available.

Cooling Tower Motors

ABB, TECO / Westinghouse, Baldor motors are available in 1/4 to 3,000 HP.

Cooling Tower Nozzles

Crossflow or counterflow, up-spray or downspray nozzles

Cooling Tower Pultruded FRP

Pultruded FRP is available in angles, beams, channels, deck board, flatsheet, and square tubes.

Cooling Tower Valves

Butterfly valves are available in lug or wafer types. Float valves are available in stainless steel or bronze. Flow control valves are available in stainless steel, hot dip galvanized, or mur tex.

Cover Leaf Metal Holding Frame

Our Clover Leaf Metal Holding Frames have "snap-out" lock edges which hold the clover leaf-shaped door in place. The 24 gauge steel "U" construction adds strength and durability to the frames. The tuck-in clover-leaf front door has a permanent hinge. The Clover Leaf Holding Frame has mitered corners, preventing protruding edges.

Crank Arms (for Cartridge Systems)

Filter Retention Hardware

Cylindrical Pulse Filter Cartridge

Cylindrical Pulse Filter Cartridges come in high efficiency media (98%) with extremely low pressure drops and high dust holding capacities...in a zinc coated moisture resistant expanded metal cartridge. Spiral Hot Melt adds extra stability. End Cap comes with a Seamless rubber Gasket standard.

Dark Vent Light Trap Modules

DRB's Dark Vent Light Trap Modules provides the highest light reduction with the lowest pressure drop for your blackout,brownout,or other dark ventilation. dark vents are available in both cellular and blade designs and in sizes that can be tailored to your needs.

Ductwork & Transitions

DRB Industries construction partners replace, rebuild, and install new ductwork and transitions to optimize your Gas Turbine's airflow and performance. We replace with stainless steel and new structural reinforcement methods to provide you with the most cost effective and advanced Inlet System components for your Gas Turbine operations.

EQP / DQP - Pleated Panel Filters

We achieve this with 100% synthetic electrostatically charged gradient density media, optimum pleat spacing and high quality construction. Our pleated filters have exceptionally high initial and sustained efficiency, high dust holding capacity, and very low pressure drop. The media is resistant to a wide range of chemicals, does not absorb moisture and will not support microbial growth.

ESCF Final Filter

The DRB ESCF Final Filter is ideal for applications requiring supported media, and fit in the Camfil / Farr HP Holding Basket. They are also a cost-effective because the media is interchangeable. Each ESCF filter element has tapered pleats to maximize the media area and assure low airflow resistance. The ESCF is made of non-woven polypropylene fibers with high tensile strength. The filter elements are collapsible, making for easy transportation.

Evaporative & Fog Cooling

DRB Industries supplies the OEM's choice for Evaporative Cooling media. Because of the number of installations we do nationwide, we provide our customers with below-factory discounts and use the most experienced and recommended installation crews in the industry. We make sure your pads are installed with a smooth, interlocking fit, on time, and within budget. We also engineer, design, and build Evaporative Cooling Modules to meet your Inlet Cooling needs.

Exchangeable Plastic Frame

Our Exchangeable Plastic Frames are not as heavy as metal frames. Built with reusable alternate plastic components, these frames have nearly an unlimited number of reuses, saving on disposal costs and reducing volume for transport and storage. Exchangeable Plastic Frames are much more rigid and hold up to moisture much better than beverage board filters.

Exhaust Silencers & Diverter Dampers

With an installed base of Gas Turbine Exhaust Systems all sround the globe, and on offshore platforms worldwide, our partner company has one of the largest installation bases in the world. Our Exhaust Silencer Systems have the best noise reduction, safety, and regulation requirements in the industry. A variety of turbine sizes are available for most OEM models. Whether repair or replacement, we provide the very best solution for your Simple Cycle, Combined Cycle, or Cogen applications. We also offer a complete line of Diverter Dampers and Louvers for your Duct Isolation needs.

F5 Rigid Pocket Filter

The F5 Rigid Pocket Filter is constructed to withstand extreme humidity, high velocities and turbulence and is excellent for all types of air handling systems. The Synthetic Media is rated at ASHRAE 45-50%.

F6 Rigid Pocket Filter

The F6 Rigid Pocket Filter is constructed to withstand extreme humidity, high velocities and turbulence and is excellent for all types of air handling systems. It is made of Synthetic Media and rated at ASHRAE 65%, MERV 10.

FGT V Bank Final Filter

The DRB FGT V-Bank Final Filter is our highest efficiency Final Filter available for Gas Turbine Applications (MERV 16 rating). The F9 Final Filter is 95% efficient down to 0.3 microns. It has a moisture resistant Wet-Laid Fiberglass media with Protections Grids on the air outlet side of the two external pleat packs. The FGT V-Bank Final Filter has an extremely low pressure drop and high dust holding capacity. The ABS Frame has a rigid construction and a 5° tilt for moisture drainage. The FGT V-Bank is available in F-7 and F-8 efficiencies (our most popular choice).

Final Filter Holding Frames

The DRB filter holding frames are comprised of “L” shaped steel bars welded together to form the rectangular shape. Adjustable tension springs to fit all pocket filters, compact filters, or combination systems are also available. The header frames of the filters are fixed inside to our holding frame at four edges with four tension springs. A complete filter wall can be put together quickly and easily. Stainless Steel is available on request.

Final Filter Wraps

DRB Industries LLC offers wraps for your Static Barrier Final Filters. Ideal for applications where medium to high efficiency is necessary, these wraps will extend the life of your Final Filters. The wraps come in many different efficiencies for your application.

FT Cylindrical Cartridge

DRB Industries offers the FT Cylindrical Filter Cartridge Filter for FARR Tenkay Pulse Jet Air Filter Systems. Our filter comes in a variety of media choices to fit your operating system. All Media comes with a dimple pleat configuration & with hot spiral glue bead to add extra stability to the media surface. Corrosion resistant Galvanized Metal Liners and Flanged End Caps are standard (SS is also available). A seamless gasket for an airtight seal is also standard. A Hot Spiral Glue bead separator adds extra stability to the media surface and provides uniform spacing.

G-4 High Efficiency Pre Filter

With the Highest Dust Holding Capacity in the Industry at 1000 grams, the G-4 High Efficiency Pre-Filter also features an extremely low initial pressure drop to help you run more efficiently. Pleat Separators ensure even distribution of the pleats across the filter. The G-4 has up to 28.4 ft2 of media (2.6 m2). A 90 weight, 28 count Beverage Board provides greater rigidity and moisture protection than competitors’ filters. The G-4 High Efficiency Pre-Filter media also comes with a 30 gauge reinforced metal support grid to add extra structural stability to the 100% Gradient Density Synthetic Media (Electro-statically Charged). The very best pre-filter protection for your equipment.

G-4 Pocket Filter

The G-4 Pocket Filter comes in standard 24” x 24” x 7” size (8 pockets) or sized to fit the EMW VK-KW System (7 pockets). It has a high dust holding capacity and low pressure drop. It has no metal parts and comes standard with an all plastic frame that is fully incinerable. The G-4 Pocket Filter uses 100% Non–Woven Polyester Pockets to provide an extremely efficient filter with high dust holding capacity. Its 7” depth allows you to use it in Final Filter or Pre-Filter applications.

GT Pre Filter

The GT Pre-Filter is an economical and efficient Pre-Filter option, and comes available in a MERV 7 rating. It has the same construction features as the G-4 Pre-Filter, but is available in a MERV 7 rated filter. Available with or without pleat separators, it has all the same high quality features & rigid beverage board as our other pre-filter. “The GT Pre-Filter is High Quality Filtration at a very affordable prices.”

GT XL HF Extended Length Final Filter

DRB Industries’ GT-XL-HF Final Filter comes in a 17” (440mm) depth. This allows for higher dust holding capacity than the normal 12” depth final filters. It has 302 ft2 of media (28m2), almost 100ft2 more than standard filters. The GT-XL-HF Final Filters are water resistant. A Hot Glue separator ensures equal spacing between pleats. Rigid, Sturdy construction makes the filters durable, easy to ship, and easy to install. The GT-XL-HF Final Filters are fully incinerable, making disposal easy as well. It also has an ABS special draining design, and reinforcing grids downstream for extra burst protection. The GT-XL-HF Final Filter comes in a variety of efficiencies.

Guard Door Pre-Filter for GE LM Units

DRB Industries’ extended surface Pre-Filters come standard with 100% Synthetic electro-statically charged gradient density media, optimum pleat spacing, and high quality construction. The Pre-Filter for Guard Door Systems is designed to collect a preponderance of dust particulate (particle build up) prior to the air entering your High Efficiency Final Filter. The Pre-Filter for Guard Door Systems has a double wall high wet strength heavy duty beverage board frame & the media packs are totally bonded to the frame with a metal support grid backing. Diagonal Stabilizer support grids are also bonded to the pleats to provide additional support and prevent pleat collapse.

Heavy Duty Pre Filter

The Heavy-Duty MR is the toughest Disposable Pre-Filter on the market today. It is made of Non-Woven Polyester media, pleated with metal grid backing and bonded to a rigid, heavy duty, moisture resistant 52 point die-cut frame. It comes with weep holes for moisture drainage. The Heavy Duty MR is designed for coastal and high humidity applications, and has almost twice the service life of standard disposable pre-filters.

HEPA Final Filter

DRB HEPA Final Filters use Minipleat technology as an alternative to traditional filter boxes with resistant aluminum separators. This increases both the volume and the life of the filter at low pressure drop. The pleats are arranged in a V-shape format for optimum flow characteristics and are glued to the polystyrol housing. All filters are free of metal parts and fully incinerable, making for easy disposal. DRB HEPA Final Filters are 99.97% efficient @ ≥ 3 microns and have a low initial pressure drop.

HESB Media Pocket Filter for Altair® Units

DRB’s Synthetic Media Bag Filters come in 95% Efficient (F-8) performance and sizes to replace the Altair Super Nova SN8 Filter Bag. The DRB (HESB) has 6 pockets of 100% synthetic polypropylene lofted microfiber media. There is a non-flammable adhesive applied to the entire header & pocket channels. The entire steel support element is staked, riveted, and glued into one composite framework to ensure leak proof pocket attachment. Cover strips are also provided to add structural integrity. A neoprene rubber gasket is standard on the air exit side (back) of header.

High Efficiency Multi-Pocket Bag Filters

DRB Pocket Filters are the most economical solution for high efficiency air filtration. We offer ASHRAE efficiencies 45%, 65%, 85% and 95% in four standard face dimensions and six standard pocket lengths up to 36". We also offer "Quality Paks" with OIL MIST collection media. This allows maximum flexibility to tailor per application. Non-standard sizes are also available.

HRSG Stacks & SCR Systems

DRB Industries' partner company can build and / or repair your HRSG and heat boilers. We can design or supply HRSG, SCR, or CO catalyst systems for your Simple or Combined Cycle plant. Whether SCR Catalyst Installation / Replacement, Complete Combustion Retrofit, or simple repairs to components, we have complete HRSG and SCR / CO Catalyst Services to meet your needs.

Inlet Silencers

DRB Industries and its world class partner design Industrial Silencers and manufacture the OEM’s choice for Industrial Silencers for a wide range of applications. Our Silencers come in a variety of Cross-Sections and lengths for non-standard and application specific configurations. They meet a broad range of noise conditions. Our superior noise attenuation and high frequency performance provides excellent noise control over a broad spectrum. DRB Industries offers silencer sections in most standard Flange Patterns or special design for your specification. We also offer a variety of Absorptive Pack Materials designed to fit your application. Our Industrial Silencers are designed to also meet a wide range of temperatures (from –20°F all the way up to Internal Gas and Skin temperatures of 200° F). Our Industrial Silencers come in three different standard models (including our economical Low Pressure Drop and our High Performance Model, for the most demanding of acoustical and temperature environments). Companies such as GE, Siemens–Westinghouse, Pratt and Whitney, Rolls Royce, Nuovo Pignone, and Solar have installed these silencer systems around the globe. If the best noise reduction, lowest pressure drop, and lowest maintenance costs are your goal, our expert team can replace or install an Inlet Silencer package to meet your critical demands.

Inner Filter Liner

DRB Industries’ Inner Filter (1st Stage) Liners are the latest in 100% Polyester Filter Media Technology. This new technology provides customers with a more efficient, stiffer, more rigid inner liner than the standard, traditional blue soft media that the leading competitor provides.

Internal Vane Fogging Nozzles

Always get consistent size droplets every time. No guesswork wich means better evaporation and more power in the end.

L6 - Liquid Level Switch

Easy In-wall or External Installation, Up to 2000 psig (138 bar)

L8 - Liquid Level Switch

Low Cost, Leak Proof Body, Excellent Chemical Resistance

Mist Eliminator

DRB Mist Eliminator filters are highly effective in significantly reducing oil mist, water mist, fog or rain droplets. In addition, they are useful downstream of chilled water coils and steam. They are used in turbine intakes to effectively stop moisture ingression. Mist Eliminators are constructed of a 16-gauge galvanized steel frame (standard); 18-gauge type 304 stainless steel optional.

Moisture Separator

Inlet moisture control systems are essential for the proper operation of turbo machinery. The Moisture Separator is a panel type droplet separator comprised of alternate layers of flat and herringbone crimped galvanized screen. It comes retained in a galvanized steel or stainless steel frame with bottom drain holes. It is our highest quality moisture separator (available in galvanized or stainless steel).

P Clip

Filter Retention Hardware

PHOCID Waterline Cleaner & Acidification

PHO CID is a Water Cleaner and Acidification Treament. It cleans your water system,optimizes the pH..and improves overall water quality.

Plenums & Expansion Joints

We repair & replace Transitions, Wing / Cowl / Plenums, and Expansion Joints. Our improved systems reduce external heat transfer, making your unit more efficient and safer to operate. Our new state of the art Expansion Joint Belt Fabrics prevent insulation and heat damage from getting into the belt. They expand and contract under the harshest operating conditions. Our expert crews have a reputation as the most experienced in the industry in Plenum and Expansion Joints installation. Designed with a newer Cooler Flange Shell Design, the External Flanges are isolated from heat, making your whole exhaust area safer and easier to operate and maintain. Comes in a variety of liner systems (Free-Floating Liner System most common). This dramatically reduces Skin Temperature by more than ˝ of the older versions. Our expert crews can install your system in just a few weeks to meet your outage schedule.

Polyester Cube Filters

We offer a wide array of polyester medias. Each of these medias meet specific performance characteristics with a unique blend of fiber sizes, binders and tackifiers. We configure these medias into a variety of products with single or multiple media layers. This gives you maximum flexibility tomeet any need. We can also customize media combinations per your specifications. We’ve got the filter for your application.

Polyester Pad Filters

Our High Efficiency Polyester Pads and Rolls are made from a High Loft, Multi Denier Blend Polyester Media. They have Low Pressure Drop and High Dust Holding Capacity, and come available in a wide variety of sizes, thicknesses, and MERV ratings. Polyester Pads and Rolls are also available with a Non-Migrating Tackifier.

Pre Filter Clip

Filter Retention Hardware

Pre-Filter Wraps

DRB Pre-Filter Wraps provide excellent protection and prolong the life of your cartridge filters. Our High Arrestance Efficiencies and Low Pressure Drops make your Gas Turbine perform efficiently. Our Filter Wraps are available in Chain-Stitched or popular Velcro designs. These medium efficiency filters are designed to capture large particles before they get to your Cartridge Filters. This extends the service life of your cartridge filters. All DRB Pre-Filter Wraps are available in a High-Loft Multi-Denier Media that is non-migrating. Our filters are designed to UL 900 Class 2 standards and have a minimal effect of pressure drop.

Pulse Filter Cylindrical & Conical Combination

DRB Industries’ Cylindrical – Conical Pulse Filter Cartridge Combination System comes in a variety of media choices to fit your operating conditions. With our Pulse Filter Cartridges you get High Efficiency Media, Low Pressure Drop, and High Dust Holding Capacity in a Rugged Filter System. We use pleat Separators and hot spiral glue bead to add extra stability to the media surface. Corrosion resistant Galvanized Metal Liners and End Caps are standard (SS is also available). A seamless gasket is part of the PFC – Combination to provide an air tight seal.

Q Cell Final Filter

The Q Cell Final Filter has deep “V” pleats to maximize exposure to air for even dust holding capacity. The pleats are tapered to channel air through the filter. The Q Cell Final Filter is made with 26 gauge galvanized steel for maximum rigidity and to resist corrosion. Plastic separators prevent blowout or the bowing of the pleat packs. The filter media is synthetic and resistant to moisture, abrasion, and microbial growth. The Q Cell Final Filter comes in a variety of efficiencies for your specific application.

Repair Kit for Solenoid Valve

Spare Part Repair Kits for Solenoid Valves used in Pulse Jet cleaning systems(includes core tube,spring and core)

Rigid Cell Filters

Today's highly efficient air handling systems maximize efficiency by varying airflow according to the needs of the occupied space. The Rigid Cell Filter is built with special plastic separators and heavy gauge metal backing to hold the pleated media stable at any airflow for maximum media utilization. This filter is constructed with polypropylene media and separators to discourage microbial growth and is offered in ASHRAE ratings of 45%, 65%, 85%, and 95% and Odor Ban carbon media.

Self Supported Pre-Filters

DRB Industries offers a Self-Supported Pre-Filters. These filters are made with special self-supported, multi-layered, non-cellulose pleated media which eliminates the need of metal backing. They are enclosed in a waterproof frame made of proprietary board material that will not deform or degrade throughout the service life of the filter.

SMP Mini-Pleat Panel Filter for Altair® Units

The SMP Mini-Pleat Panel Filter offers maximum filtration in a 2” filter frame. The media is a single web of gradient density fibers which achieves high dust holding, high efficiency, and low pressure drop. The pleats are held rigid and evenly spaced to maintain even loading and air distribution. The entire filter is constructed of polypropylene which offers several advantages; one being the filter does not support the growth of bacteria, fungi, or mold. Another benefit is that these filters will not corrode or degrade over an extended service period, even under high humidity conditions. Polypropylene media is much more puncture resistant than glass paper and is resistance to most chemicals.

Soft Pocket Bag Filter

The Soft Pocket Filter has a uniquely designed extruded aluminum frame for increased stability, reduced corrosion, and greater filter life. The pocket seams are ultrasonically sealed to prevent leakage and reduce the possibility of tearing. The Soft Pocket Filter comes in 100% synthetic media, resistant to all types of bacterial growth, and with internal pocket spacers to provide lower pressure drop and reduced energy costs.

Spring Clip

Filter Retention Hardware

Spring Hook Clip

Filter Retention Hardware

SSF Composite Cartridge Filter (LM 6000)

New technology advances in synthetic filter media has allowed us to make available the Composite Cartridge Filter. A Dual Element Composite System designed specifically for GE LM 6000 units, the Composite Filter consists of an inner filter element (made of a non-woven multi-denier polyester liner) and an outer filter that utilizes the latest breakthroughs in filter media efficiency today. The Composite Cartridge Filter employs a proprietary filter media composed of a network of sub-micron porous fibers bonded to the surface of the media. This extra layer of protection on the substrate of the media gives you greater dust loading & longer service life than standard media formulations.

Static Canister Filter

DRB Industries’ GDX Canister Filters are perfect for use in supply air systems for gas turbines and turbo compressors both on and off shore. Plastic end caps (optional) eliminate the risk of rust and corrosion. Depth Loading Synthetic non-shredding media resists moisture, chemicals, and all types of bacterial growth. GDX Canister Filters are designed to provide low pressure drops while maximizing useful lifetimes, even under extreme operating conditions.

Structural / Support Steel

DRB Industries construction crews repair and reinforce existing structural units and support steel components for your Gas Turbine Units. Our component repair and support services also includes installation and repairs of platforms, ladders, doors, etc., all to meet your demanding structural integrity requirements.

Swirl Air™ Nozzles

Delavan Spray Technologies, part of the Goodrich Corporation, is a world leader in the design and manufacture of high quality spray nozzles and fluid handling systems.

Timer Board

Timer Board for Pulse Jet Cleaning Systems that begin pulse cleaning at programed times during the day. Comes in With Complete Control Box (Boards,Relays,Sockets,Fuses and Power Supply).

Tite Latches

Filter Retention Hardware

Twist-Lock Replacement Filters

DRB Industries’ Twist Lock Cartridge Filter is specifically designed as a direct replacement for Pneumafil Pulse Cleaning Systems. Our Twist Lock Cartridge comes with a twist lock top and all the high filter performance features you expect from DRB Industries. Media options are available in both 80/20 Blended Media and 100% Synthetic Media. We use Pleated Separators to maintain proper spacing both inside and outside of the pleat pack. As always, all DRB cartridge filters come with 100% air-tight adhesive to prevent bypass, and a seamless rubber gasket for secure fit. Our Twist Lock Cartridge comes standard with G-60 Corrosion Resistant Zinc Coating or optional Stainless Steel is available.

V-Bank Final Filter

Designed to withstand high velocities and turbulence, the V-Bank Final Filter is excellent for all types of air handling systems. Its Rigid Frame Construction prevents damage to media. The frame dimensions, depth, and filter performance of the V-Bank Final Filter meet requirements of standard air handling systems. Constructed to withstand extreme humidity, high velocities, and turbulence, the V-Bank Final Filter is excellent for all types of air handling systems. The filter element is free of metal parts, eliminating the risk of corrosion and punctures. The V-Bank Final Filter is light weight and easy to handle and provides for low-cost transport and disposal.

VIROCID Algaecide and Mineral Scale Cleaners

Virocid- A powerful way to disinfect & control all microrganisms.(Especially effective against Slime Forming Bacteria on Evaporative Cooling Media)-- Proven against bacteria,viruses and fungi. Enviromentally friendly

Washer

Filter Retention Hardware

Z Line Inserts

The Z-Line Inserts are used in our plastic holding frame, registering filter class G3 to G4. The inserts are made of the highest quality filter media and are fully incinerable. The Z-Line Inserts are made to have high stability and yet light construction (inserts have stability at 100% relative humidity), leading to a long lifetime. The media has high dust holding capacity and extremely low pressure drop.


 
HOME  | ABOUT US  | CONTACT US|   GLOSSARY


918-286-7176- phone • 918-286-7215- fax • sales@drbindustries.com • copyright 2008

Sales Office
3104 South Elm Place
Suite I
Broken Arrow, Oklahoma