| |
|
Product |
 |
Mfg |
|
 |
GT 4820 Static Barrier Final Filter (with Burst Ply Protection) |
|
|
| |
DRB Industries LLC offers the new EMW GT-4820 Barrier Filter, the latest breakthrough in reinforced filter media with exceptionally high burst pressure ratings of 25 inches W.G.” |
|
|
|
|
 |
Cylindrical Pulse Filter Cartridge |
|
|
| |
Cylindrical Pulse Filter Cartridges come in high efficiency media (98%) with extremely low pressure drops and high dust holding capacities...in a zinc coated moisture resistant expanded metal cartridge. Spiral Hot Melt adds extra stability. End Cap comes with a Seamless rubber Gasket standard. |
|
|
|
|
 |
Conical Pulse Filter Cartridge |
|
|
| |
Our High Efficiency Conical Pulse Filter Cartridges come in 2 different sizes and
have low pressure drop characteristics, high volumetric air flow, and high dust holding capacities for even the most demanding application. |
|
|
|
|
 |
FGT V Bank Final Filter |
|
|
| |
The DRB FGT V-Bank Final Filter is our highest efficiency Final Filter available for Gas Turbine Applications (MERV 16 rating). The F9 Final Filter is 95% efficient down to 0.3 microns. It has a moisture resistant Wet-Laid Fiberglass media with Protections Grids on the air outlet side of the two external pleat packs. The FGT V-Bank Final Filter has an extremely low pressure drop and high dust holding capacity. The ABS Frame has a rigid construction and a 5° tilt for moisture drainage. The FGT V-Bank is available in F-7 and F-8 efficiencies (our most popular choice). |
|
|
|
|
 |
PLEATED PRE- FILTER |
|
|
| |
A High Efficiency Pre-Filter with Low Initial Pressure Drop, High Dust Holding Capacity, and Extended Service Life…Our Quality Pleat can last up to 4 times longer than standard pads or panel type filters. |
|
|
|
|
 |
Composite Cartridge Filter (LM 6000) |
|
|
| |
The Composite Cartridge Filter is a two stage filter especially designed for LM600 systems. It has a inner and outer filter that provides quality filtration protection to GE LM 6000 units.
|
|
|
|
|
 |
High Efficiency Multi-Pocket Bag Filters |
|
|
| |
DRB Pocket Filters are the most economical solution for high efficiency air filtration. We offer ASHRAE efficiencies 45%, 65%, 85% and 95% in four standard face dimensions and six standard pocket lengths up to 36". We also offer "Quality Paks" with OIL MIST collection media. This allows maximum flexibility to tailor per application. Non-standard sizes are also available. |
|
|
|
|
 |
Combined Filter Systems - EMW VK-KW series |
|
|
| |
The ultimate in 2 stage filtration in one system. EMW VK-KW system consists of one fine filter Compact Cassette and one prefilter inside a prefilter housing. |
|
|
|
|
 |
Pocket Filter (Fine Filter) |
|
|
| |
EMW- pocket filters for finefiltration are optionally manufactured in plastic or metal frame. Depending on the requirement the pocket filters can be provided with an additional endless foamed sealing. |
|
|
|
|
 |
Pocket Filter (Coarse Filter) |
|
|
| |
EMW – pocket filters for prefiltration are optionally manufactured in plastic or metal frame. Depending on the requirement the pocket filters can be provided with an additional endless foamed sealing. |
|
|
|
|
 |
Pre-Filter Wraps |
|
|
| |
DRB Pre-Filter Wraps provide excellent protection and prolong the life of your cartridge filters. Our High Arrestance Efficiencies and Low Pressure Drops make your Gas Turbine perform efficiently. Our Filter Wraps are available in Chain-Stitched or popular Velcro designs. These medium efficiency filters are designed to capture large particles before they get to your Cartridge Filters. This extends the service life of your cartridge filters. All DRB Pre-Filter Wraps are available in a High-Loft Multi-Denier Media that is non-migrating. Our filters are designed to UL 900 Class 2 standards and have a minimal effect of pressure drop. |
|
|
|
|
 |
Minipleat Filterbox |
|
|
| |
secure separation at high strain |
|
|
|
|
 |
Flanged Replacement Filter |
|
|
| |
Flanged Top Filters direct replacement for Farr Tenkay Systems |
|
|
|
|
 |
Twist-Lock Replacement Filters |
|
|
| |
Twist-Lock Replacement Cartridge filters fit into a Pneumafil pulse self-cleaning air-filter system. |
|
|
|
|
 |
Clover Leaf Pre-Filter Holding Frame |
|
|
| |
Our Clover Leaf Metal Holding Frames have “snap-out” lock edges which hold the clover leaf-shaped door in place. The 24 gauge steel "U" construction adds strength and durability to the frames. The tuck-in clover-leaf front door has a permanent hinge. The Clover Leaf Frame has mitered corners preventing protruding edges |
|
|
|
|
 |
Coalescer Pre-Filters - Mist Eliminator |
|
|
| |
DRB Mist Eliminator filters are highly effective in significantly reducing oil mist, water mist, fog or rain droplets. In addition, they are useful downstream of chilled water coils and steam. They are used in turbine intakes to effectively stop moisture ingression. Mist Eliminators are constructed of a 16-gauge galvanized steel frame (standard); 18-gauge type 304 stainless steel optional. |
|
|
|
|
 |
DURASeal EXCEL Panel |
|
|
| |
The DURASeal XCEL Panel has a moisture resistant, durable plastic frame, making it self-supporting. The outer media trim self seals to the filter track. It has low airflow resistance and high dust holding capacity. The DURASeal XCEL Panel is 100% recyclable and incinerable with no metal parts. It is very efficient and comes in a non-woven polyester media. They come 24 to a box, providing very user-friendly storage (less handling & space requirement), and are extremely easy to install. |
|
|
|
|
 |
ESCF Final Filter |
|
|
| |
The DRB ESCF Final Filter is ideal for applications requiring supported media, and fit in the Camfil / Farr HP Holding Basket. They are also a cost-effective because the media is interchangeable. Each ESCF filter element has tapered pleats to maximize the media area and assure low airflow resistance. The ESCF is made of non-woven polypropylene fibers with high tensile strength. The filter elements are collapsible, making for easy transportation. |
|
|
|
|
 |
Exchangeable Plastic Frame |
|
|
| |
Our Exchangeable Plastic Frames are not as heavy as metal frames. Built with reusable alternate plastic components, these frames have nearly an unlimited number of reuses, saving on disposal costs and reducing volume for transport and storage. Exchangeable Plastic Frames are much more rigid and hold up to moisture much better than beverage board filters. |
|
|
|
|
 |
F5 Rigid Pocket Filter |
|
|
| |
The F5 Rigid Pocket Filter is constructed to withstand extreme humidity, high velocities and turbulence and is excellent for all types of air handling systems. The Synthetic Media is rated at ASHRAE 45-50%. |
|
|
|
|
 |
F6 Rigid Pocket Filter |
|
|
| |
The F6 Rigid Pocket Filter is constructed to withstand extreme humidity, high velocities and turbulence and is excellent for all types of air handling systems. It is made of Synthetic Media and rated at ASHRAE 65%, MERV 10. |
|
|
|
|
 |
Final Filter Wraps |
|
|
| |
DRB Industries LLC offers wraps for your Static Barrier Final Filters. Ideal for applications where medium to high efficiency is necessary, these wraps will extend the life of your Final Filters. The wraps come in many different efficiencies for your application. |
|
|
|
|
 |
G 4 High Efficiency Pre Filter |
|
|
| |
With the Highest Dust Holding Capacity in the Industry at 1000 grams, the G-4 High Efficiency Pre-Filter also features an extremely low initial pressure drop to help you run more efficiently. Pleat Separators ensure even distribution of the pleats across the filter. The G-4 has up to 28.4 ft2 of media (2.6 m2). A 90 weight, 28 count Beverage Board provides greater rigidity and moisture protection than competitors’ filters. The G-4 High Efficiency Pre-Filter media also comes with a 30 gauge reinforced metal support grid to add extra structural stability to the 100% Gradient Density Synthetic Media (Electro-statically Charged). The very best pre-filter protection for your equipment. |
|
|
|
|
 |
G 4 Pocket Filter |
|
|
| |
The G-4 Pocket Filter comes in standard 24” x 24” x 7” size (8 pockets) or sized to fit the EMW VK-KW System (7 pockets). It has a high dust holding capacity and low pressure drop. It has no metal parts and comes standard with an all plastic frame that is fully incinerable. The G-4 Pocket Filter uses 100% Non–Woven Polyester Pockets to provide an extremely efficient filter with high dust holding capacity. Its 7” depth allows you to use it in Final Filter or Pre-Filter applications. |
|
|
|
|
 |
GT Pre Filter |
|
|
| |
The GT Pre-Filter is an economical and efficient Pre-Filter option, and comes available in a MERV 7 rating. It has the same construction features as the G-4 Pre-Filter, but is available in a MERV 7 rated filter. Available with or without pleat separators, it has all the same high quality features & rigid beverage board as our other pre-filter. “The GT Pre-Filter is High Quality Filtration at a very affordable prices.” |
|
|
|
|
 |
GT XL HF Extended Length Final Filter |
|
|
| |
DRB Industries’ GT-XL-HF Final Filter comes in a 17” (440mm) depth. This allows for higher dust holding capacity than the normal 12” depth final filters. It has 302 ft2 of media (28m2), almost 100ft2 more than standard filters. The GT-XL-HF Final Filters are water resistant. A Hot Glue separator ensures equal spacing between pleats. Rigid, Sturdy construction makes the filters durable, easy to ship, and easy to install. The GT-XL-HF Final Filters are fully incinerable, making disposal easy as well. It also has an ABS special draining design, and reinforcing grids downstream for extra burst protection. The GT-XL-HF Final Filter comes in a variety of efficiencies. |
|
|
|
|
 |
Guard Door Pre-filter for LM6000 Systems |
|
|
| |
DRB Industries’ extended surface Pre-Filters come standard with 100% Synthetic electro-statically charged gradient density media, optimum pleat spacing, and high quality construction. The Pre-Filter for Guard Door Systems is designed to collect a preponderance of dust particulate (particle build up) prior to the air entering your High Efficiency Final Filter. The Pre-Filter for Guard Door Systems has a double wall high wet strength heavy duty beverage board frame & the media packs are totally bonded to the frame with a metal support grid backing. Diagonal Stabilizer support grids are also bonded to the pleats to provide additional support and prevent pleat collapse. |
|
|
|
|
 |
Heavy Duty Pre Filter |
|
|
| |
The Heavy-Duty MR is the toughest Disposable Pre-Filter on the market today. It is made of Non-Woven Polyester media, pleated with metal grid backing and bonded to a rigid, heavy duty, moisture resistant 52 point die-cut frame. It comes with weep holes for moisture drainage. The Heavy Duty MR is designed for coastal and high humidity applications, and has almost twice the service life of standard disposable pre-filters. |
|
|
|
|
 |
HEPA Final Filter |
|
|
| |
DRB HEPA Final Filters use Minipleat technology as an alternative to traditional filter boxes with resistant aluminum separators. This increases both the volume and the life of the filter at low pressure drop. The pleats are arranged in a V-shape format for optimum flow characteristics and are glued to the polystyrol housing. All filters are free of metal parts and fully incinerable, making for easy disposal. DRB HEPA Final Filters are 99.97% efficient @ ≥ 3 microns and have a low initial pressure drop. |
|
|
|
|
 |
Inner Filter Liner |
|
|
| |
DRB Industries’ Inner Filter (1st Stage) Liners are the latest in 100% Polyester Filter Media Technology. This new technology provides customers with a more efficient, stiffer, more rigid inner liner than the standard, traditional blue soft media that the leading competitor provides. |
|
|
|
|
 |
Minipleat Compact Cassette - secure separation at high strain |
|
|
| |
EMW Compact Cassettes have a maximum of surface area in little space and therefore a long lifetime under economical operating conditions |
|
|
|
|
 |
MZ Moisture Separator |
|
|
| |
Inlet moisture control systems are essential for the proper operation of turbo machinery. The MZ Moisture Separator is a panel type droplet separator comprised of alternate layers of flat and herringbone crimped galvanized screen. It comes retained in a galvanized steel or stainless steel frame with bottom drain holes. It is our highest quality moisture separator
(available in galvanized or stainless steel).
|
|
|
|
|
 |
Polyester Pad Filters |
|
|
| |
Our High Efficiency Polyester Pads and Rolls are made from a High Loft, Multi Denier Blend Polyester Media. They have Low Pressure Drop and High Dust Holding Capacity, and come available in a wide variety of sizes, thicknesses, and MERV ratings. Polyester Pads and Rolls are also available with a Non-Migrating Tackifier. |
|
|
|
|
 |
Poret Foam / Pre Filter |
|
|
| |
Poret® Foam is excellent in high moisture and salt coastal environments. It has high ageing stability, making it a very popular filtration choice. Because it is washable and easily discarded, Poret® Foam is also very easy to use. It has very high dust holding capacity. It also contains no plasticizers and has high ozone and oxygen resistance. It is temperature resistant up to 100°C (212°F). The process by which Poret® Foam is formed is completely CFC free and Poret® Foam can be used multiple times saving you time and money. |
|
|
|
|
 |
Q Cell Final Filter |
|
|
| |
• The Q Cell Final Filter has deep “V” pleats to maximize exposure to air for even dust holding capacity. The pleats are tapered to channel air through the filter. The Q Cell Final Filter is made with 26 gauge galvanized steel for maximum rigidity and to resist corrosion. Plastic separators prevent blowout or the bowing of the pleat packs. The filter media is synthetic and resistant to moisture, abrasion, and microbial growth. The Q Cell Final Filter comes in a variety of efficiencies for your specific application. |
|
|
|
|
| |
Soft Pocket Bag Filter |
|
|
| |
The Soft Pocket Filter has a uniquely designed extruded aluminum frame for increased stability, reduced corrosion, and greater filter life. The pocket seams are ultrasonically sealed to prevent leakage and reduce the possibility of tearing. The Soft Pocket Filter comes in 100% synthetic media, resistant to all types of bacterial growth, and with internal pocket spacers to provide lower pressure drop and reduced energy costs. |
|
|
|
|
 |
Static Canister Filter |
|
|
| |
DRB Industries’ GDX Canister Filters are perfect for use in supply air systems for gas turbines and turbo compressors both on and off shore. Plastic end caps (optional) eliminate the risk of rust and corrosion. Depth Loading Synthetic non-shredding media resists moisture, chemicals, and all types of bacterial growth. GDX
Canister Filters are designed to provide low pressure drops while maximizing useful lifetimes, even under extreme operating conditions.
|
|
|
|
|
 |
V Cell Final Filter |
|
|
| |
DRB’s V-Cell Barrier Final Filter is uniquely designed for Air Inlet Gas Turbine Filter applications. The V-Cell Barrier Final Filter is highly efficient (95% per ASHRAE) and has an Extremely Low Pressure Drop. The V-Cell is all Plastic / Fully Incinerable and comes with a Seamless Foam in Place Gasket standard. The V-Cell Barrier Final Filter has the High Efficiency and Low Initial Pressure Drop that you want for your Gas Turbine Operating Environment. |
|
|
|
|
 |
V-Bank Final Filter |
|
|
| |
Designed to withstand high velocities and turbulence, the V-Bank Final Filter is excellent for all types of air handling systems. Its Rigid Frame Construction prevents damage to media. The frame dimensions, depth, and filter performance of the V-Bank Final Filter meet requirements of standard air handling systems. Constructed to withstand extreme humidity, high velocities, and turbulence, the V-Bank Final Filter is excellent for all types of air handling systems. The filter element is free of metal parts, eliminating the risk of corrosion and punctures. The V-Bank Final Filter is light weight and easy to handle and provides for low-cost transport and disposal. |
|
|
|
|
 |
Z Line Inserts |
|
|
| |
The Z-Line Inserts are used in our plastic holding frame, registering filter class G3 to G4. The inserts are made of the highest quality filter media and are fully incinerable. The Z-Line Inserts are made to have high stability and yet light construction (inserts have stability at 100% relative humidity), leading to a long lifetime. The media has high dust holding capacity and extremely low pressure drop. |
|
|
|
|
| 